Update of the software - Designer Topaz

1. Download the software to your USB embroidery stick.
2. Make sure that the machine is turned off. Connect the USB embroidery stick loaded with the new software
version to the USB port on the machine.
3. Press and hold the Needle Stop Up/Down button and the Reverse button at the same time. With both of
these buttons fi rmly depressed, turn on the machine.
4. The new Software version will install automatically. When the LED next to the reverse button starts fl ashing,
release the buttons.
The update procedure can take several minutes. The GraphicDisplay will be blank while the LEDs next to
the STOP, FIX and Reverse buttons are indicating in different combinations.
When the update is completed the machine will restart automatically. Check the software version number in
the SET Menu.
Note: If the update is not completed successfully the LEDs next to the STOP, FIX and Reverse button will
fl ash simultaneously. Turn off the machine and start the update from the beginning.